Qolsys IQ Panel 2 Z-Wave Pairing Instructions

Follow these steps to pair Z-Wave devices with the Qolsys IQ Panel 2:

Step 1: Access Settings

Press or swipe down on the clock display at the top to reveal the Settings Tray, then press Settings.

Step 2: Advanced Settings

Press Advanced Settings and enter the default installer code 1111.

Step 3: Installation

Press Installation, then select Devices.

Step 4: Add Z-Wave Device

Press Z-Wave Devices, then press Add Device, and select Pair to enter pairing mode.

Step 5: Pairing Process

The IQ Panel 2 will enter Z-Wave learn mode. Use your Z-Wave device’s remote or internal button to start pairing.

Step 6: Finalize the Pairing

Once paired, the panel will display the device settings. Press Name, then choose a name for the device. Press Add and return to the home screen.

2GIG GC2 Z-Wave Pairing Instructions

Follow these steps to pair Z-Wave devices with the 2GIG GC2:

Step 1: Access Z-Wave Settings

Press Services, then press the Z-Wave logo.

Step 2: Advanced Settings

Press the wrench icon for settings, then enter the default installer code 1561.

Step 3: Add Z-Wave Devices

Press Add Devices to enter Z-Wave learn mode.

Step 4: Activate the DSC26103 In-Wall Switch

Use one of the two methods below to activate the DSC26103 in-wall switch:

• Press Include on the remote to begin the Z-Wave inclusion process.

• In a 3-wire system, toggle the external switch/button or push the internal button to initiate pairing into the Z-Wave network.

Step 5: Complete the Pairing

Once the learning process is complete, press Back or Home to exit.

Interlogix Simon XTi Z-Wave Pairing Instructions

Follow these steps to pair Z-Wave devices with the Interlogix Simon XTi:

Step 1: Access Programming

Press the gear icon to open the settings menu, then press the down arrow several times until you reach Programming.

Step 2: Enter Programming Mode

Press Enter next to Programming, enter your master code, and press Ok.

Step 3: Access Z-Wave Menu

Press Interactive Services, then select Z-Wave.

Step 4: Add Z-Wave Device

Press Add Device to start the learning process.

Step 5: Activate the DSC26103 In-Wall Switch

Use one of the two methods below to activate the DSC26103 in-wall switch:

• Press Include on the remote to begin the Z-Wave inclusion process.

• In a 3-wire system, toggle the external switch/button or push the internal button to initiate pairing into the Z-Wave network.

Step 6: Complete the Pairing

The Simon XTi will beep and display "Device XX Added." Press Close several times to exit.

Interlogix Simon XT Z-Wave Pairing Instructions

Follow these steps to pair Z-Wave devices with the Interlogix Simon XT:

Step 1: Access Z-Wave Menu

Hold the Star button (*) for 10 seconds to open the Z-Wave menu.

Step 2: Enter Z-Wave Learn Mode

Hold the 1 key for 10 seconds to enter Z-Wave learn mode.

Step 3: Pairing Process

The Simon XT will enter Z-Wave learn mode. Once in this mode, you can initiate the pairing process for your device.

Step 4: Activate the DSC26103 In-Wall Switch

Use one of the two methods below to activate the DSC26103 in-wall switch:

• Press Include on the remote to begin the Z-Wave inclusion process.
• In a 3-wire system, toggle the external switch/button or push the internal button to initiate pairing into the Z-Wave network.

Step 5: Pairing Completion

When successful, the Simon XT will beep and display the number of devices in memory. Hold the # button for 10 seconds to exit.

Step 6: Exit the Menu

Hold the # button for 10 seconds to exit the Z-Wave menu.