ADC-V720W Outdoor Camera Guide

This camera is discontinued but can still be added and viewed on Alarm.com account

Specifications

Warning! Erases everything, camera must be re-added to Alarm.com and WiFi configured

Remove plastic cover and hold Reset button 15 seconds until LED flashes red and green

Plug Ethernet cable into back of camera and back of customer network router

1. Hold WPS button 5 seconds, LED by button rapidly flashes green

2. Press and release WPS button on router or enable WPS in router programming

3. After 2 minutes camera LED turns green if successful or red if failure

Note: the camera must first be connected to Wi-Fi.

2. Select Settings.

002_Brinks_Home_App__Desktop__Video-Live_Video_Default.png

3. Scroll to the bottom of the page and select Add video device.

4. The camera should be detected. Enter the camera name, then select Install.

004_Brinks_Home_App__Desktop__Name_Camera_and_Install.png

5. The camera is added to the network, which can take several minutes.

6. When finished, select Live View to view images from a newly installed camera.

Note: The camera must first be connected to Wi-Fi.

1. Log in to the Brinks Home Mobile App and press Video (found under the menu icon in the top left corner.

2. Select Settings by pressing the Gear icon in the upper, right-hand corner.

3. Select Add video device, then select your compatible device type.

003b_Mobile_App_Select-Device_Clean

4. The camera should be detected. Enter the camera name, then select Next.

5. The camera may take several minutes to configure.

6. When finished, select Live View to view images from a newly installed camera.