ADC-T2000 Smart Thermostat Features
Features
- • Compatible with Alarm.com-compatible security systems, like the 2GIG GC3 or Qolsys IQ Panel 2, utilizing Z-wave functionality
- • Control via the thermostat directly or remotely using the Brinks Home™ Mobile App
- • Allows for customized scheduling and temperature presets
- • Receive alerts if someone adjusts the ADC-T2000 Smart Thermostat while they are away
- • As a Z-Wave device, the ADC-T2000 can be integrated into smart scenes with other Z-Wave devices
- • The ADC-T2000 can also be used with the ADC-S2000 Temperature Sensor for accurately reading the temperature across a larger building
Settings
| Setting | Description | Default State |
|---|---|---|
|
Display On |
The thermostat mode and temperature is displayed at all times when this feature is enabled. |
On Note: only available if connected to AC power when enrolled. |
|
Display Brightness |
Controls the brightness of the thermostat display when Display On is enabled. | N/A |
| Heat/Cool Setpoint | The allowed range for the Target Temps in Heat and Cool modes. |
Heat: 40˚F - 95˚F Cool: 50˚F - 95˚F |
| Overshoot | The number of degrees beyond the Target Temp the system heats or cools before shutting off. (Recommend leaving this at 0 for comfort and efficiency reasons) | 0˚F |
| Swing | The number of degrees, above and below the Target Temp, the HVAC system comes on to cool or heat, preventing wear on the system components due to excessive cycles. | 1˚F |
| Thermostat Lock |
|
Disabled |